yoshimura logo
yoshimura logo
kat logo
Promote your product on pages that see over 100,000 hits a month
WEBMASTER
Katana Channel
Katana Group
11timing

11timing

1000tim

1000tim

crotors

crotors

ctorq

ctorq

didchain

didchain

etorq

etorq

Katclockswiring

Katclockswiring

katcolorcode2

katcolorcode2

mtorq

mtorq

spec2

spec2

specs

specs

On this page you will find Katana GS1000 and GS1100 engine, chassis and misc bolt torque specifications, Dyna, Mikuni and other installations sheets,  GS1000 and  Katana GS1100 timing specs. Have a look through the sheets to see if the information you need is there.
If it is not,
EMAIL me or leave a note on the COMMENTS page.  I will see if we can get the info you need posted.
Let's have a look at some weight loss numbers in respect to converting the stock GS 750/1000/1100 wheels and suspension to GSXR running gear.

This conversion will shed close to 25 lbs of weight which the engine doesn't have to move. 14 lbs. Of which is rotating mass loss. Increasing performance and fuel mileage.

Add to this a 4 into 1 header and depending on the pipe you can shed another 20 lbs.

Forks, triples, clipons,barends, axle, speedo drive
28
F/R calipers, hanger, brake stay
10
Rear wheel
26
Front wheel
16
530 chain/630 chain
4
Front rotors
6
29
13
32
22
12
6
GSXR 750 (94)    GS 1100
TOTAL POUNDS          90               114
Katana Fork Length
32"
Katana Oil Cooler fittings
14x1.5
Kat swingarm length
21.5"
Kat stock shock length
13"
Kat piston pin
18mm
1150 piston pin
20mm
Suzuki brake banjo bolt
10x1.0mm
Tokico 6 piston banjo bolt
10x1.25mm
GS pivot width
226mm
Kat rotor/hanger spacer
23.5mm
Oil filter cap
30x1.5
R/S oil gallery bolt
14x1.25
Cam link bolts
14x1.25
1991/95 GSXR 750 fork length
29.5"
1991/95 GSXR 750 fork diameter
50/54mm
1991/95 GSXR 1100 fork diameter
52/56mm
vindecodeth